Votive Wick Pin - NOT CURRENTLY AVAILABLE Votive Wick Pin - NOT CURRENTLY AVAILABLE
Part No: EQWICKPIN
$0.00
Qty:




Votive Wick Pin 

~NOT CURRENTLY AVAILABLE~
The old style cupped or coned shaped bottom wick pins are no longer available.  We did some testing with the newer flat base wick pins and were not happy with the results.  The new pins did not self center in the molds and required mold release spray to keep from sticking and breaking the candle bottomes.

THERE IS A BETTER WAY! (in our opinion)
We had a super good recommendation from a customer that makes thousands of votive candles a year.  He did away with the wick pins all together and instead started drilling a small hole through the candle after it hardens.  This person does so many that he made a jig to center it over the bit on a mini drill press to speed it up and make the hole straighter, but, if you’re not doing allot of them you can do it with a Dremel tool or regular drill. The best part is you don’t have the damaged bottoms and you don’t have to keep cleaning the wick pins.




Copyright © 2001-2021 Candle Soylutions